Wood Screws for Indoor Furniture, Timber Joints and Hinge Fixing

Product Information

Wood Screws are pointed, coarse-thread fasteners for indoor furniture assembly, general timber joints and fixing compatible hinges or fittings directly into wood. The threads engage the timber to hold the fitting or joined component in place. Select the screw diameter, length and head profile for the wood thickness and hardware hole, allowing sufficient engagement without the point breaking through the opposite face.

Pre-drill a suitable pilot hole for conventional wood screws, especially in hardwood, close to edges or when using larger diameters. Pilot diameter and depth depend on the actual screw geometry and timber; an undersized hole can cause splitting or excessive driving torque, while an oversized hole reduces grip. Use a clearance hole in the upper member where the joint design requires it, and countersink only when using a matching countersunk head. These screws are not advertised as no-pre-drill structural screws.

Drive with a Drill/Driver and the correct bit, or a matching manual screwdriver for controlled small jobs. Start with a low clutch setting and finish without stripping the recess or overdriving the head. For handles, use wood screws only when the fitting is designed to screw directly into timber; handles with tapped posts require the specified machine screws instead. Ordinary interior wood screws are not substitutes for rated structural fasteners, exterior decking screws or direct masonry fixings.

Features & Benefits

• COARSE WOOD THREAD - Engages timber for general interior furniture and joinery work.
• POINTED TIP - Helps locate the screw in a prepared pilot hole; not a drill-point fastener.
• HARDWARE MATCHING - Select the head and diameter to suit the hinge or fitting hole.
• PILOT-HOLE INSTALLATION - Prepare holes to suit screw geometry, timber and edge distance.
• CONTROLLED DRIVING - Compatible bit and controlled torque help avoid recess damage and stripped wood.
• WHOLESALE SOURCING - Confirm dimensions, finish, sample and packing requirements before ordering.